Basic parameters Material: Stainless Steel Power: / w Flow: 0-100 Drive: Pneumatic Performance: Automatic head: / m Principle: axial flow speed: / Shaft position: horizontal number of impeller: / Impeller: / Impeller method : / Brand: shine-east Model: M Description gas-liquid booster pump output pressure is high, the maximum fluid output pressure up to 400Mpa; wide range of applications, operating medium for the hydraulic oil, water and most chemicals corrosive liquids, and high reliability, maintenance-free and long life; a wide output range; flexible application; easy adjustment; automatic packing; safe operation; maintenance is simple; cost-effective. M Series of gas-liquid booster pump with built-in two-way single air control valve for automatic reciprocation of the pump, the series of products for my company after digestion and absorption of foreign products in accordance with the type of product design and manufacturing standards. Gas drive part adopts aluminum and oxidation process, the pump head can be selected depending on the medium carbon steel or stainless steel. The series of drive piston diameter of 80mm, using pressure ≤8bar. The pump has the following characteristics: ◆ Light weight, easy to carry ◆ flow, pressure ◆ easy to control a wide range of manual control to automatic control can be applied to most of the liquid to achieve ◆ ◆ no electricity, can be used in hazardous situations ◆ Ease Maintenance ◆ ◆ applies to most liquids without electricity for use in hazardous situations ◆ easy to maintain turbochargers than the outlet pressure flow L / min Connection size Weight Kg bar psi driving port entrance exit M4 4: 1 32 464 15.36 G3 / 8 NPT 1 NPT 1/2 4.8 M10 10: 1 80 1160 7.15 G3 / 8 NPT 3/4 NPT 1/2 4.3 M16 16: 1 128 1856 4.59 G3 / 8 NPT 1/2 NPT 1/2 4.2 M30 30: 1 240 3480 2.53 G3 / 8 NPT 1/2 NPT 3/8 4.2 M44 44: 1 352 5104 1.41 G3 / 8 NPT 3/8 NPT 3/8 4.1 M64 64: 1 512 7424 0.95 G3 / 8 NPT 3/8 NPT 3 / 8 4.1 M100 100: 1 800 11600 0.64 G3 / 8 NPT 3/8 NPT 3/8 4.1 M170 170: 1 1360 19720 0.37 G3 / 8 NPT 3/8 M14 * 1.5 4.1 * pressure ratio to drive the piston area / hydraulic column Cypriot area * outlet pressure of air driven pressure static outlet pressure (estimated value and the maximum allowable value) 8bar (116psi) * When the flow of air driven pressure 6bar (87psi), the outlet pressure is 0 Approximate flow pump * The minimum driving pressure for pump operation is 3bar (43.5psi), depending on the particular pressure ratio reaches a certain output pressure of gas-liquid booster MD series MD series pump is single drive head double acting pump, with its characteristic M series the same pump, but with the same specifications M series pumps, pulse small and its flow pump increased by 50% over the M series single-acting. Turbochargers than the outlet pressure flow L / min Connection size Weight Kg bar psi driving port inlet and outlet MD30 30: 1 240 3480 4.09 G3 / 8 NPT 1/2 NPT 3/8 5.1 MD44 44: 1 352 5104 2.42 G3 / 8 NPT 3/8 NPT 3/8 5.1 MD64 64: 1 512 7424 1.68 G3 / 8 NPT 3/8 NPT 3/8 5.1 MD100 100: 1 800 11600 1.01 G3 / 8 NPT 3/8 NPT 3/8 5.1 MD170 170: 1 1360 19720 0.59 G3 / 8 NPT 3/8 M14 * 1.5 5.1 * pressure ratio to drive the piston area / hydraulic ram area * outlet pressure of air driven pressure static outlet pressure (estimated value and the maximum 8bar (116psi) when the permit value) * flow rate in an air driven pressure 6bar (87psi), the outlet pressure is approximately zero flow pump pressure * The minimum required pump driving operation is 3bar (43.5psi), depending on the particular pressure ratio reaches a certain Output pressure M ** - 2 series of gas-liquid booster pump M ** - 2 series pumps are single acting double drive head booster, compared with M series pump, which can produce a double pressure at the same air drive output pressure. M ** - 3 series of gas-liquid booster pump M ** - 3 series pump is single action three booster pump drive head, compared with the M series pump, it can produce three times the output pressure at the same air drive pressure. Turbochargers than the outlet pressure flow L / min Connection size Weight Kg bar psi driving port inlet and outlet M100-2 200: 1 1600 23200 0.41 G3 / 8 NPT 1/4 M14 * 1.5 6.1 M170-2 340: 1 2720 39440 0.23 G3 / 8 NPT 1/4 M14 * 1.5 6.1 M100-3 300: 1 2400 34800 0.26 G3 / 8 NPT 1/4 M14 * 1.5 7.1 Welcome to inquire M170-3 510: 1 4080 59160 0.13 G3 / 8 NPT 1/4 M14 * 1.5 7.1 * pressure ratio to drive the piston area / hydraulic ram area * outlet pressure of air driven pressure to static outlet pressure 8bar (116psi) when the (estimated value and the maximum allowable value) * flow of air driven pressure 6bar (87psi), the minimum driving pressure outlet pressure is approximately zero flow pump is required to run the pump * 3bar (43.5psi), depending on the particular pressure ratio reaches a certain output pressure